Piece display PCB discussion
Re: Piece display PCB discussion
Was this before the base PCB stopped working and is it an engraved or etched board?.
Re: Piece display PCB discussion
This was before the main board stopped working. as other pieces were glowing.
I replaced BOTH 2R2 resistors and now the voltage is 11-12V at All 2R2 and 6R8 resistors. The Nixie tubes however do not glow. What is the next step to troubleshoot?
I replaced BOTH 2R2 resistors and now the voltage is 11-12V at All 2R2 and 6R8 resistors. The Nixie tubes however do not glow. What is the next step to troubleshoot?