Start here - Kit contents

[Tony]

When you receive your kit there should be the following:

2 sheets of paxolin 400x400mm, one engraved for the chessboard top and one with a cutout for the power socket
33 paxolin strips for the case sides
7 plastic bags of parts
34x IN-7 Nixie tubes
4 large PCBs with 16 printed coils on each
1 12V power supply (you will need to supply a suitable mains lead for your location

[Tony]

Bag 1 contents:

.

• 25/26x M4 Stainless steel or brass dome nuts
• 25/26x M4x20 bolts
• 50x M4 Stainless steel washers
• 18x M4 Nuts
• 9x M4 Washers
• 18x Paxolin spacers or 60x washers
• 8x Rubber feet

[/b]

[Tony]

Bag 2 contents:

• 33x Chesspiece bases

[Tony]

Current kits have pre-built piece PCBs. You'll find the pin sockers in the base component bag.

Bag 4 contents:

• 32x Display PCBs
• 75x ‘D’ socket pins (3x 25 pin sockets)
• 230x 1N4148 Diodes
• 33x 1N Capacitors (Yellow)
• 230x 10N Capacitors (Brown)

[/b]

[Tony]

Bag 5 contents:

• 4x 1k 1/4W Resistors
• 4x .47r 1/4W Resistors fusible
• 65x 1n Ceramic capacitors
• 80x 10n Ceramin capacitors
• 40x 33u 16v Electrolytic capacitors
• 13x 4v7 Zener Diodes
• 20g Lead free 'solder'

[/b]

[Tony]

Bag 6 contents:

• 65x 2n7000 MOSFET
• 4x 8 pin DIL sockets
• 4x PIC10f320 Microcontrollers

[/b]

[Tony]

Case parts:

[Tony]

Main board PCBs: