Start here - Kit contents

[Tony]

When you receive your kit there should be the following:

3 sheets of paxolin 400x400mm, one engraved for the chessboard top, one with a cutout for the power socket and one for the base.
45 paxolin strips for the case sides
6 plastic bags of parts (contents listed below)
27 IN-15A and 6 IN-15B Nixie tubes
1 12V power supply (you will need to supply a suitable mains lead for your location)

[Tony]

Bag 1 contents:

.

• 26x M4 Steel dome nuts
• 26x M4x20 bolts
• 26x M4 Steel washers

[/b]

[Tony]

Bag 2 contents:

• 32x 0.8mm piece case bases
• 80x Paxolin spacers
• 12x Rubber feet

[/b]

[Tony]

Bag 3 contents:

• 33x Chesspiece bases

[/b]

[Tony]

Bag 4 contents:

• 32x Display PCBs
• 32x 100uH inductors
• 75x ‘D’ socket pins (3x 25 pin sockets)
• 230x 1N4148 Diodes
• 33x 4n7N Capacitors (Green)
• 230x 10N Capacitors (Brown)

[/b]

[Tony]

Bag 5 contents:

• 2x 22k 1/4W Resistors
• 2x 1k2 1/4W Resistors
• 1x 4A quickblow Fuse
• 16x Ferrite filters (chokes)
• 65x 100uH Inductors
• 65x 4n7 capacitors (Green)
• 66x 10n Ceramic capacitors (Brown)
• 52x 33u 16v Electrolytic capacitors
• 14x 14V Zener Diodes
• 2x 5v1 Zener Diodes
• 1x Power socket
• 60x 2.5mm PCB interconnect pins
• 15-20g Lead free 'solder'
• 16x Coil driver PCBs
• 2x 'Spine' PCBs

[/b]

NOTE: The first 14 kits are missing the 22k resistors, later ones have been repacked. If you don't have them please contact me for replacements.

[Tony]

Bag 6 contents:

• 65x 2n7000 MOSFET
• 1x 8 pin DIL socket
• 2x 14 pin DIL sockets
• 2x 74HCT14 hex buffer IC
• 1x PIC10f320 Microcontroller

[/b]

[Tony]

Case panels - base, coil frame and top.