Case Assembly discussion
Case Assembly discussion
Suggestions for improvements, mistakes, hints here please.
Re: Case Assembly discussion
Tony, I'm done with the clock and it appears top work exactly as the instructions say. The problem I am having is the shinny cover just before the top plate is so opaque that the hand gestures never work. As soon as I take the cover off it works. Are the blue leds tricking it?. I dine have heart shrink so I covered the sensor with a straw I colored black.
Re: Case Assembly discussion
The straw may be getting crushed when the lid is on. It may look opaque but to IR it's a piece of clear glass - try it in front of a cheap phone camera (they usually don't have IR blocking filters). You might find a piece of cable insulation a better solution.
Re: Case Assembly discussion
Tony, you were right. I made a short tube out of some rubberized tape and made sure it mated flush with the cover piece. IR does get through the cover and the issue was my choice of material to hide the internal distracting light. It wasn't sufficient. All is well. This has been a delightful kit to assemble!. Freaking awesome.Tony wrote:The straw may be getting crushed when the lid is on. It may look opaque but to IR it's a piece of clear glass - try it in front of a cheap phone camera (they usually don't have IR blocking filters). You might find a piece of cable insulation a better solution.