Page 4 of 4
Re: PCB assembly discussion
Posted: Thu Aug 10, 2017 2:46 am
by Tony
Yes, or less depending on the temperature ranges you want to display. The short pin at the front is counted as pin 1, from there it's %2, C14, K10 and the anode is pin 8.
Re: PCB assembly discussion
Posted: Wed Aug 30, 2017 8:15 am
by NixieFan1116
Which ir led goes with the metal sensor? I need to know the wavelength value...
Re: PCB assembly discussion
Posted: Wed Aug 30, 2017 2:49 pm
by Tony
it's the one WITHOUT brown tape, 940nm.