Page 1 of 1
Start here - Kit contents
Posted: Mon Nov 18, 2013 12:59 am
by Tony
When you receive your kit there should be the following:
2 sheets of paxolin 400x400mm, one engraved for the chessboard top and one with a cutout for the power socket
33 paxolin strips for the case sides
7 plastic bags of parts
34x IN-7 Nixie tubes
4 large PCBs with 16 printed coils on each
1 12V power supply (you will need to supply a suitable mains lead for your location
Re: Start here - Kit contents
Posted: Mon Nov 18, 2013 1:03 am
by Tony
Bag 1 contents:
.
- 25/26x M4 Stainless steel or brass dome nuts
- 25/26x M4x20 bolts
- 50x M4 Stainless steel washers
- 18x M4 Nuts
- 9x M4 Washers
- 18x Paxolin spacers or 60x washers
- 8x Rubber feet
[/b]
Re: Start here - Kit contents
Posted: Mon Nov 18, 2013 1:05 am
by Tony
Bag 2 contents:
Re: Start here - Kit contents
Posted: Mon Nov 18, 2013 1:10 am
by Tony
Current kits have pre-built piece PCBs. You'll find the pin sockers in the base component bag.
Bag 4 contents:
- 32x Display PCBs
- 75x ‘D’ socket pins (3x 25 pin sockets)
- 230x 1N4148 Diodes
- 33x 1N Capacitors (Yellow)
- 230x 10N Capacitors (Brown)
[/b]
Re: Start here - Kit contents
Posted: Mon Nov 18, 2013 1:12 am
by Tony
Bag 5 contents:
- 4x 1k 1/4W Resistors
- 4x .47r 1/4W Resistors fusible
- 65x 1n Ceramic capacitors
- 80x 10n Ceramin capacitors
- 40x 33u 16v Electrolytic capacitors
- 13x 4v7 Zener Diodes
- 20g Lead free 'solder'
[/b]
Re: Start here - Kit contents
Posted: Mon Nov 18, 2013 1:17 am
by Tony
Bag 6 contents:
- 65x 2n7000 MOSFET
- 4x 8 pin DIL sockets
- 4x PIC10f320 Microcontrollers
[/b]
Re: Start here - Kit contents
Posted: Mon Nov 18, 2013 1:18 am
by Tony
Case parts:
Re: Start here - Kit contents
Posted: Mon Nov 18, 2013 1:19 am
by Tony
Main board PCBs:
